2019 X-Yachts Xc 35

The smallest member of the award-winning Xc family, the Xc 35 is a compact cruiser with a big heart. The Xc 35 shares the same DNA heritage as her bigger Xcruising sisters, offering a perfect compromise between cruising comfort and sailing performance. She is a compact but surprisingly well equipped bluewater cruising yacht with smooth hull line, a stylish yet practical cockpit and uncluttered but functional deck layout. Easily sailed short-handed, she can also accomodate guests with a two double cabin layout, spacious saloon and ample storage. There are a choice of keel drafts as well.

The Xc 35 has a sandwich construction hull and deck with X-Yachts’ famous steel keel girder system for unrivalled rigidity and security. It carries a deep keel for a low centre of gravity, with an optional shallow draft version, and recessed through-hull fittings and a folding propeller for reduced drag. Above deck, there is a keel-stepped tapered mast section, with discontinuous rod rigging as standard, and powerful backstay adjustment for complete control. A furling headstay as standard makes for stress-free short-handed sailing, with twin wheels, six large self-tailing winches and an under-deck mainsheet system led aft from the coachroof, which allows for full cockpit tent coverage.

Basic Boat Info

Make: X-Yachts
Model: Xc 35
Year: 2019
Category: Sail
Construction: Fiberglass

Dimensions

Length: 33 ft
Length Overall: 34 ft
Waterline Length: 31'6 ft
Beam: 11'6 ft
Max Draft: 6'3 ft
Min Draft: 5'3 ft
Displacement: 26,455 lb
Dry Weight: 14,219 lb
Ballast: 10,990 lb
Cabins Count: 2

Engines / Speed

Engines: 1
  • Make: Yanmar
  • Model: 3YM30
  • Engine Power: 30hp
  • Type: Inboard
  • Propeller Type: 2 Blade

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 44 gal
Fuel Tank Material: Aluminum
Water Tanks: 1
Water Tank Capacity: 65 gal
Water Tank Material: Plastic

Other

Heads Count: 1
Drive Type: Sail
Boat Class: Cruisers
More Info : Manufacturer Website
Hull
  • Built in sandwich construction with structural compressed foam
  • Bi-directional E-glass strategically positioned for strength and weight optimization
  • Solid laminate in high stress areas around keel and through hull fittings
  • Outer surface of hull in white sprayed Gelcoat (RAL 9010) with 3 waterlines in dark grey Gelcoat (RAL 7011)
  • Hull moulded in female moulds for highest quality surface finish
  • Structural bulkhead in marine plywood varying in thickness from 16-20 mm
  • Steel frame - hot-galvanised - high strength, absorbs all loads from keel and mast
  • Single point hoist for easy and safe lifting and launching of the yacht
  • Bathing platform incorporated in transom port with hoisting and lowering system, manual
  • Bathing ladder (folding) in stainless steel fitted onto the top surface of the bathing platform
  • Continuous stainless steel rail protection mounted on sheerline
  • Hull recessed portlights - X-Yachts style (2 pcs)
Deck
  • Built in E-glass polyester and sandwich construction with structural compressed foam and solid aluminium or plywood inserts in way of all deck fittings
  • E-glass with bi-directional strategically positioned for strength
  • Outer surface of deck in white sprayed Gelcoat (RAL 9010)
  • Deck and locker lids moulded in female moulds for highest quality surface finish
  • Teak in cockpit, vacuum applied to cockpit sole, seats and bathing platform
  • GRP bulwark
  • Anchor locker - drained with space for anchor chain
  • Gas locker, self draining GRP box below port aft seat locker lid, for 2 x 3 kg gas bottles (1 x 3 kg is delivered with the yacht). Can accommodate US gas cylinder
  • Lanyards with hooks fitted to the cockpit locker lids and the anchor locker lid to keep them in open position
  • Optional cockpit table in stainless steel and teak with space for navigation instruments and compass, see extras
Accommodations
  • Xc 35 - two cabin layout
  • First class craftsmanship characterises wooden interior with minimum number of visible screws
  • Pre-selected, T-teak veneer throughout yacht, hand polished and varnished to satin finish
  • Bulkheads in various thickness securely bonded to the hull
  • White painted bulkhead seperating owner's cabin and anchor locker and aft and longitudinal bulkhead of aft cabin
  • GRP deck head liner with integrated light fittings
  • GRP hull liner including head's floor and self draining shower tray
  • Floorboards of 16 mm marine plywood with imitated teak and Gaboon plywood inlay stripes and inspection hatches to access bilge
  • Freeboard in cabins lined with white vinyl covered 6 mm panels
  • Companionway steps of curved laminated unvarnished teak
  • Handrails by entrance and alongside coach roof portlights in main cabin

Owner's cabin

  • Large double berth (205 cm x 175 cm, max width). Marine plywood mattress supports with ventilation holes for improved ventilation. Mattresses in 120 mm comfort foam - spring mattresses optional
  • Symmetrical wardrobes port and starboard (68 cm x 62 cm) with hangers
  • Freeboard shelves above berth
  • Storage space under owner's berth for bedding
  • Access to speed and depth transducers below floorboards

Saloon

  • To port: L-shaped 4 seater sofa (200 cm x 94 x 61 cm) surrounding dining table, foldable
  • To starboard: Long sofa (200 cm x 61 cm)
  • To starboard: Dedicated navigation station (80 cm x 62 cm) with ample storage for charts. Drawers below and additional storage below navigation seat
  • Upper storage cabinets behind both sofas, with book shelves and supports below
  • Electrical switch board located adjacent to navigation seat with additional space for navigational and communication equipment

Aft cabin

  • Large double berth (198 cm x 180 cm, max width) marine plywood mattress support with ventilation holes for improved ventilation. Mattresses with 120 mm comfort foam
  • Double wardrobe (75 cm x 70 cm) with shelves and hangers
  • Freeboard shelve above berth

Head & Shower Compartment

  • Bulkheads with white surfaces and furniture in GRP and T-teak veneer
  • Marine toilet, manually flushed
  • Tabletop and sink in white GRP
  • Mixer taps, single lever luxury for sink and shower
  • Electrical pump for shower floor sump, manually operated switch
  • Towel hook and paper holder in stainless steel
  • Mirrors integrated in cupboard doors
Galley
  • Galley, U-shaped (130 cm x 130 cm). Large table top made in Camoan white Corian
  • Double sink, rectangular recessed stainless steel with single lever mixing tap (2 pcs)
  • Cool box, GRP top opened 120 ltrs with 100 mm insulation, built in Isotherm SP, accumulator plate sea water cooled Danfoss compressor
  • Gas cooker - 2 burner cooker with oven
  • Shelves, drawers and lockers provide storage space for cutlery and food
  • Waste bin mounted under sinks
Engine
  • Yanmar 4 stroke vertical, fresh water cooled diesel engine with 3 cylinders and 30 HP type 3YM30 with 12V/120A alternator fitted on engine and SD20 saildrive
  • Special engine compartment with sound insulation ensures low noise level in yacht
  • Engine easily accessible for service at the forward end, through removable wooden companionway entrance with steps; and from the aft end via removable
  • GRP box in the aft cabin
  • Folding propeller, 2-bladed bronze for S-drive
  • Engine control panel and throttle/gear lever placed in starboard cockpit coaming. Engine control panel incorporates rpm meter, hour counter, acoustic alarm for oil pressure and cooling water temperature
  • Tank for diesel in aluminium for fuel mounted in starboard cockpit locker. VDO analogue level gauge, baffles, filter with water separator and shut-off valve and deck fill (165 litre)
Electrical
  • 12V DC system throughout yacht
  • X-Yachts’ custom made main switch board includes 21 circuit brakers fuses, 3 analogue meters, one for monitoring actual voltage of service and engine battery bank, one for monitoring actual level in fuel tank and one for monitoring level in the fresh water tank. The 12V DC system also includes a 12V DC plug that is located next to the electrical panelAll 12V DC system cables are terminated the electrical panel
  • 12V DC system for main engine installation
  • AGM battery 130 Amph@12V securely mounted under main cabin sofa (1 pcs x 130Ah)
  • Separate engine AGM battery with capasity of 70 aH/760A CCA (Cold Crankrig Amps) mounted near main engine for starting of engine. Battery is charged via the engine
  • Battery watch - cuts the power if the voltage falls below 11.2V and thereby protects your battery bank for deep discharge
  • Shore power installation with shore power inlet mounted in cockpit protected by 10A main fuse. 230V AC distribution box located at navigation table with integrated ground fault circuit breaker/10A fuse, 230 V AC socket and switches for hot water immersion heater and battery charger. Shore power cable - 25 meters
  • Battery charger, Victron 12V/25A
  • The yacht is equipped with a combination of LED and halogen reading- and dome lights fitted throughout the cabins, the head and the saloon. The dome spot lights are integrated in the inner liner
  • 1 chart table snake light
Mast and Rigging
  • Fractional double spreader, tapered silver anodized aluminium mast stepped on steel frame and specially designed for Xc 35
  • Engine steaming light, Windex with light, tube for additional electrical equipment and 2 mast steps fitted
  • Silver anodized boom with single line reefing and internal boom outhaul, telescopic vang and outer purchase block system

Standing Rigging

  • Split backstay fitted with block system on one side
  • Chain plates in stainless steel fitted to stainless steel tie rods (2 pcs) for shrouds
  • Rod rigging throughout with turnbuckles
  • Chain plates in stainless steel for forestay and split backstay (3 pcs)
  • Furling forestay drum attached to bow fitting. Furling line led back to cockpit for easy handling

Running Rigging

  • Spectra halyards led back to cockpit for easy handling:
  • Main halyard 10 mm
  • Genoa halyard 10 mm
  • Mast head spinnaker halyard 10 mm
  • Spectra sheets and polyester control and reefing lines:
  • Mainsheet 10 mm
  • Genoa sheet 10 mm
  • Reef 1 10 mm
  • Reef 2 10 mm
  • Furling control line 8 mm
  • Outhaul 8 mm
  • Vang control line 8 mm
Accessories
  • Flag pole, teak with bronze bushing (1 pcs)
  • Fire extinguishers, dry powder of 2 kg each, fitted throughout the yacht (4 pcs) and one fire blanket
  • Fenders, white air-filled with lanyards and X-Yachts logo (4 pcs)
  • Mooring ropes, polyester 20 m x 14 mm (2 pcs)

Contact Us


More From X-Yachts


2019 X-Yachts Xp 44
2019 X-Yachts X4³
2019 X-Yachts Xc 45
2019 X-Yachts Xc 50
2019 X-Yachts Xc 38