2018 X-Yachts Xc 42

The Xc 42 offers true flexibility. The adaptable sail plan ensures superb pace on all angles, with options including an inner forestay (without runners). The Xc 42 may fly either a 140% overlapping genoa or smaller 108% genoa, 90% self-tacking jib, or asymmetric spinnaker, for relaxing sailing on long bluewater passages and short stopovers, sailing with two crew or a full complement of guests.

Sail area may be easily adjusted thanks to a furling forestay and slab-reefing mainsail, or optional in-boom furling. Anchoring and mooring are also stress-free, thanks to a bow thruster, electric windlass, large bow locker, and optional stern davits for a tender.

Basic Boat Info

Make: X-Yachts
Model: Xc 42
Year: 2018
Condition: New
Category: Sail
Designer: Niels Jeppesen
Construction: Fiberglass
Keel Type: Other Keel

Dimensions

Length: 42'0 ft
Waterline Length: 37'8 ft
Beam: 13'5 ft
Max Draft: 6'10 ft
Min Draft: 5'7 ft
Displacement: 26,455 lb
Dry Weight: 11376 lb
Ballast: 10990 lb
Cabins Count: 3

Other

Heads Count: 2
Boat Class: Racers and Cruisers, Racers
More Info :
Hull
  • Built in sandwich construction with vinylester and polyester resins with structural compressed foam
  • Outer surface of hull in white sprayed Gelcoat (RAL 9010 white) with 3 waterlines in dark grey Gelcoat (RAL 7011 dark grey)
  • Hull moulded in female moulds for highest quality surface finish
  • Structural bulkhead in marine plywood varying in thickness from 16-30 mm
  • Steel frame - hot-galvanised, high strength, laminated into hull to absorb all loads from keel mast and rigging
  • Single point hoist for easy and safe lifting and launching of the yacht
  • Bathing platform incorporated in transom port with electrical hoisting and lowering system
  • Bathing ladder in stainless steel mounted onto bathing platform
  • Continuous stainless steel rail protection mounted on sheerline
  • Hull recessed portlights - X-Yachts style (4 pcs)
Deck
  • Built in sandwich construction with vinylester and polyester resins with structural compressed foam
  • Bi-directional E-glass strategically positioned for strength and weight optimization
  • Outer surface of deck in white sprayed Gelcoat (RAL 9010 white)
  • Deck and locker lids moulded in female moulds for highest quality surface finish
  • Teak deck, vacuum applied, 9 mm nominal thickness on side deck, coach roof, cockpit sole, seats and bathing platform
  • Bulwark with teak capping incorporated in deck/hull design
  • Anchor locker - drained with space for anchor chain
  • Gas locker for 2 x 3 kg gas bottle (1 x 3 kg is delivered with the yacht)
  • Space for a 6 man life raft in one of the large cockpit lockers
  • Gas springs fitted to all cockpit lockers (4 pcs)
  • Cockpit table with space for navigation instruments (see extras) and compass
Accommodations
  • Xc 42 available in two and three cabin layout
  • First class craftsmanship characterises wooden interior with minimum number of visible screws
  • Pre-selected, top grade teak veneer throughout yacht, hand polished and varnished to satin finish
  • Bulkheads in various thickness bonded to hull
  • Bulkheads with white laminate surfaces with recessed teak panel looks
  • GRP deck head liner with integrated light fittings
  • GRP hull liners fore and aft including heads floors and shower trays
  • Floorboards of 20 mm marine plywood with imitated teak and Gaboon plywood inlay stripes and inspection hatches to access bilge
  • Freeboard in cabins of lined vinyl covered 6 mm panel
  • Soft white headlining panels in main and owners cabin
  • Companionway steps of curved unvarnished teak
  • Handrails by entrance and alongside coach roof portlights in main cabin
  • Blinds and flyscreen throughout on Oceanair skylights (6 pcs)

Owner's cabin

  • Large double wing berth (200cm x 200 cm, max width) with removable centre piece. Marine plywood with ventilation holes for improved ventilation and support for mattress
  • Settee to starboard (60 cm)
  • Double wardrobe (100 cm x 72 cm) to starboard with shelves and hangers
  • Drawers below wardrobe on starboard
  • Freeboard cupboards and shelves above berth
  • Storage space under owner's berth for bedding
  • Inspection hatch in floorboards for access to speed and depth transducers

Owner's Head

  • Bulkheads covered with white laminate surfaces
  • Manually flushed marine toilet
  • Dedicated shower compartment with Plexi glass doors
  • Space for optional washing machine (see extras)
  • Tabletop and sink in white GRP
  • Single lever luxury mixer taps for sink and shower
  • Electric pump for shower floor sump, manual operated
  • Towel hooks and paper holder in stainless steel
  • Mirrors integrated into cupboard doors

Saloon Head

  • Bulkheads covered with white laminate surfaces
  • Marine toilet, manually flushed
  • Tabletop and sink in white GRP
  • Mixer taps, single lever luxury for sink and shower
  • Electrical pump for shower floor sump, manually operated
  • Towel hooks and paper holder in stainless steel
  • Mirrors integrated in cupboard doors
Galley
  • Galley, U-shaped (150 cm x 154 cm). Large table top made in Camoan white Corian
  • Sinks, rectangular recessed stainless steel with single lever mixing tap (2 pcs) incl. 2 cutting boards made of Delrin material
  • Cool box, GRP top opened 140 l with 100 mm insulation, built in Isotherm SP, accumulator plate cooled by water cooled Danfoss compressor
  • Gas cooker - 3 burner cooker with oven
  • Shelves, drawers and lockers with Plexi glass sliding doors provide storage space for cutlery and food
  • Waste bin mounted under sinks
Engine
  • Main engine Volvo 55 HP 4 cylinder water cooled diesel engine with S-Drive
  • Special engine room with sound insulation ensures low noise level in yacht
  • Engine easily accessible for service from front through companionway steps and from side through removable panels in aft cabins
  • Folding propeller, 3-bladed bronze for S-drive
  • Engine control panel and throttle/gear lever placed in starboard cockpit coaming. Engine control panel incorporates rpm meter, hour counter, acoustic alarm for oil pressure and cooling water temperature
  • Tank in aluminium for fuel in port aft cabin. VDO analogue level gauge, baffles, inspection hatches, separator incl. filter and shut-of valve and deck fill (220 l)
Electrical
  • 12 V DC system throughout yacht
  • X-Yachts main switch board with 27 automatic fuses and 3 analogue VDO meters
  • 12 V DC system for main engine installation
  • Combined deck and steaming light fitted
  • All cabling terminates in “dry” GRP box fitted behind main electrical panel for added safety
  • AGM batteries (total 260 Ah@12 V) securely mounted under main cabin sofa (2 pcs x 130Ah)
  • Separate engine spiral-cell battery (55 Ah, 12 V) mounted near main engine for starting of engine and optional generator only. Charging of battery either via engine and/or generator.
  • Shore power installation with 10 Amp shore power inlet socket mounted in cockpit. 230V AC distribution box with ground fault circuit breaker and 230 V AC socket mounted at navigation station
  • Battery charger and immersion heater connected to 230V AC distribution box
  • Charger 12V/50A, mounted
  • 12 V halogen lights fitted for general purpose below deck throughout cabins
  • Chart table light fitted
  • General lights and dome spotlights integrated in inner liner
  • Reading lights throughout aft cabin, main cabin and owner's cabin (8 pcs)
Mast and Rigging
  • Fractional double spreader, tapered silver anodized aluminium mast stepped on steel frame and specially designed for Xc 42
  • Combined deck and steaming light, Windex with light, tube for additional electrical equipment and 2 mast steps fitted
  • Silver anodized boom with single line reefing and internal boom outhaul with control on boom, telescopic vang and outer purchase block system

Standing Rigging

  • Split backstay fitted with single Navtec 10 integral backstay adjuster on port side and turnbuckle on starboard
  • Tip cups in stainless steel fitted to stainless steel tie rods (2 pcs)
  • Discontinuous rod rigging throughout with rod turnbuckles
  • Chain plates in stainless steel for forestay and split backstay (3 pcs)

Running Rigging

  • Spectra halyards, sheets and control lines led back to cockpit for easy handling:
  • Main halyard 12 mm
  • Genoa halyard 12 mm
  • Mast head spinnaker halyard 12 mm
  • Spectra and polyester control and reefing lines:
  • Mainsheet 10 mm
  • Genoa Sheet 12 mm
  • Reef 1 10 mm
  • Reef 2 10 mm
  • Furling control line 10 mm
  • Outhaul 8 mm
  • Vang control line 8 mm
Accessories
  • Flag pole, teak with bronze bushing (1 pcs)
  • Fire extinguishers, dry powder of 2 kg each, fitted throughout the yacht (3 pcs) and one fire blanket
  • Fenders, white air-filled with lanyards and X-Yachts logo (4 pcs)
  • Mooring ropes, polyester 20 m x 14 mm (2 pcs)

Contact Us


More From X-Yachts


2024 X-Yachts X-Power 33C
2024 X-Yachts X4⁹ MkII
2024 X-Yachts Xp 50
2024 X-Yachts X4⁶
2024 X-Yachts X4³