2018 X-Yachts Xp 38

The Xp 38 delivers an unrivalled sailing experience in a dual-purpose cruiser-racer. This model after launching, quickly developed into a global fleet, with boats sold from Japan to Hungary, Switzerland to Australia. It was nominated for Boat of the Year, with one judge commenting: “The main reason you own this boat is because you love sailing. Seeing it underway, it just lights you up.” (Tim Murphy, Cruising World). This enjoyment comes from the Xp 38’s high level of responsiveness, thanks to high ballast ratio, light and stuff epoxy infusion construction and carbon keel structure, and controllable sail plan. High stability and ease of handling makes the Xp 38 a rapid and comfortable yacht to cruise with excellent sea-keeping in all conditions, as well as a high performance racing design for both inshore and offshore. It has scored a host of race victories under both IRC and ORC.

Basic Boat Info

Make: X-Yachts
Model: Xp 38
Year: 2018
Condition: New
Category: Sail
Construction: Fiberglass

Dimensions

Length: 38 ft
Waterline Length: 34 ft
Beam: 12'2 ft
Max Draft: 7'10 ft
Min Draft: 6'10 ft
Displacement: 26,455 lb
Dry Weight: 14936 lb
Ballast: 10990 lb
Cabins Count: 3

Tanks

Fuel Tank Capacity: 40 gal
Fuel Tank Material: aluminium
Water Tank Capacity: 69 gal
Water Tank Material: Plastic

Other

Heads Count: 1
Boat Class: Racers
More Info :
Hull
  • Built in sandwich construction with structural foam core
  • Bi-directional and uni directional E-glass strategically positioned for strength and weight optimization
  • Solid laminate in high stress areas in way of keel top, sail drive and rudder tube.
  • Outer surface of hull in white sprayed Gel coat (RAL 9010 white) with 3 waterlines in dark blue Gel coat (RAL 5011 dark blue)
  • Hull epoxy infused in female moulds for optimum consolidation and high quality surface finish
  • Structural bulkheads in marine plywood varying in thickness from 16-20 mm bonded to hull
  • Structural liner moulding laminated into hull. Carbon fibre reinforcements to absorb all loads from keel and mast
  • Single point hoist for easy and safe lifting and launching of the yacht
  • Bathing ladder in stainless steel mounted on transom
  • Hull recessed port lights - Rectangular (6 pcs)
Deck
  • Built in sandwich construction with structural foam
  • E-glass with bi and uni-directional cloth strategically positioned for strength
  • Outer surface of deck in white sprayed Gel coat (RAL 9010 white)
  • Deck and locker lids moulded in female moulds for highest quality surface finish
  • Teak, vacuum applied, 9 mm nominal thickness on cockpit sole and seats
  • Variable height bulwark incorporated in deck/hull design providing safe toe rail forward and comfortable hiking aft
  • Anchor locker - drained area with space for anchor & optional chain.
  • Gas locker compartment, for 2 x 3 kg gas bottle, drained to the sea
  • Liferaft can be stored in stb aft cockpit locker. Second liferaft can be stored in port aft locker (max size tbc). Both lockers are hinged aft.
  • Gas springs fitted to forward and aft cockpit lockers (4 pcs )
  • Halyard locker recessed into cockpit
  • Cockpit floor locker, hinged lid, for optional cockpit table
Accommodations
  • Xp 38 - Three cabin layout with sliding nav station
  • The interior will consist a combination of composite and wooden units.
  • Utilising First class craftsmanship and lamination techniques.
  • Pre-selected, top grade T-teak veneer, hand polished and varnished to satin finish
  • T-teak veneered main bulkheads
  • White laminate bulkheads used inside bathrooms, on aft bulkhead and centre bulkhead in aft cabins
  • GRP deck head liner with integrated light fittings. Pleated blinds hidden behind soft panelling on coach roof side
  • GRP hull liner including heads floor and shower tray
  • Floorboards of 16 mm marine plywood with imitated teak and Gaboon plywood inlay stripes and inspection hatches to access bilge.
  • Companionway (GRP moulding) with steps of curved unvarnished teak
  • Handrails by entrance and alongside coach roof port lights in main cabin
  • Oceanair blinds incl fly screen fitted to skylights (6 pcs)

Owner's cabin

  • Large double berth. Marine plywood mattress supports. Mattresses in 120 mm comfort foam. Max size 205 x 178 cm
  • 2 x Large double composite wardrobe with shelves and hangers on starboard.
  • 2 x night table with lower storage on port side
  • Freeboard shelves above berth
  • Storage space under owners berth for bedding
  • Freeboard lined with white vinyl covered 7 mm panels

Main cabin

  • To port: Long L-sofa (240 cm x 61 cm) and dining table, foldable, with centre box with 2 drawers, one for bottles
  • To starboard - Standard sliding navigation table (75cm x 56 cm) with storage for navigational stationary and instrument.
  • Sliding navigator's seat with storage space for additional navigational and emergency equipment. The "sliding system" enables the navigator to face forward whilst sailing [sofa length with seat in aft position = 135 cm,
    sofa length with seat in forward position = 175 cm].
  • All sofa fronts in white GRP
  • To starboard - Optional 3 cabin version with fixed aft facing nav station: Sofa length of 175 cm, and drawers underneath chart table.
  • All sofa front covered with T-teak veneer
  • To starboard - Optional 2 cabin version with fixed forward facing nav station: Nav station table with drawers underneath. Sofa length of 220 cm.
  • All sofa front covered with T-teak veneer
  • Deep shelves behind the back rest including a set stainless steel book holders
  • Deep overhead lockers with bottom hinged openings running full length of saloon
  • Electrical switch board located above chart table on upper lockers.
  • Freeboard lined with white vinyl covered 7 mm panels

Aft Cabin

  • Large double berth (204 cm x 145 cm, max width) Marine plywood mattress support with ventilation holes. Mattresses 120 mm comfort foam.
  • Large double composite wardrobe with shelves and hangers . 84 x 70cm
  • Freeboard lined with white vinyl

Head & Shower Compartment

  • Upper cabinet fronts in heads with T-teak veneer surface
  • Bulkheads covered with white laminate
  • Tabletop and sink in a white composite moulding
  • Mixer taps, single lever luxury for sink and shower
  • Electrical pump for shower floor sump, manually operated switch
  • Towel rail and grab handle running around table top in stainless steel
  • Towel hooks and loo roll holders
  • Mirrors above sinks
Galley
  • Galley, High gloss white Composite moulding L-shaped (151 cm x 172cm).
  • Drawer unit with 4 drawers - top 3 drawers for cutlery and bottom drawer dedicated for tools
  • Sinks, rectangular recessed stainless steel with single lever mixing tap (2 pcs) including cutting boards / covers
  • Cool box, GRP top opened 130 l with 100 mm insulation, built in Isotherm SP, accumulator plate sea water cooled
  • Danfoss compressor
  • Gimballed Gas cooker - 2 Jet - model Eno One
  • White surface lower lockers provide storage space for crockery and food
  • T-teak veneer surface upper lockers for plates and food
  • 10mm hardened Glass splash board
  • Waste bin mounted under sinks
Engine
  • Main engine 29 HP water cooled diesel engine with S-Drive
  • Special engine compartment with sound insulation ensures low noise level in yacht
  • Engine easily accessible for service at the forward end, through companionway steps; and from the aft end via removable GRP boxes.
  • Folding propeller, 2-bladed bronze for S-drive
  • Engine control panel and throttle/gear lever placed in starboard cockpit coaming.
  • Engine control panel incorporates rpm meter, hour counter, acoustic alarm for oil pressure and cooling water temperature
  • Fuel tank in aluminium for fuel below sofa in saloon. Analogue level gauge, filter with water separator and shut-off valve and deck fill (175 litre)
Electrical
  • 12 V DC system throughout yacht
  • X-Yachts main switch board with 27 automatic fuses and 3 analogue meters for fuel, water and battery voltage.
  • 12 V DC system for main engine installation
  • All cabling terminates in “dry” GRP box fitted behind main electrical panel for added safety
  • AGM batteries (total 220 Ah@12 V) securely mounted in forward cabin (2 pcs x 110Ah)
  • Separate engine spiral-cell battery (55 Ah, 12 V) mounted near main engine for starting of engine. Engine battery is charged by the engine.
  • Shore power installation with shore power inlet mounted in cockpit protected by 10A main fuse. 230V AC distribution box located in aft cabin with integrated ground fault circuit breaker/10A fuse, 230 V AC socket and switches for hot water immersion heater and battery charger.
  • Charger 12V/35A, mounted
  • Lights fitted for general purpose below deck throughout cabins
  • Chart table light fitted
  • General lights and dome spotlights integrated in inner liner
  • Reading lights throughout aft cabins, main cabin and owners cabin (8 pcs)
Mast and Rigging
  • Fractional double spreader keel stepped mast, tapered silver anodized aluminium, specially designed for Xp 38
  • Steaming light, Windex with light, tube for additional electrical equipment
  • Silver anodized boom with single line reefing and internal boom outhaul, telescopic vang and outer purchase block system

Standing Rigging

  • Central backstay fitted with integral backstay adjuster.
  • Chain plates in stainless steel fitted to bull walk/on top of hull (2 pcs)
  • Discontinuous rod rigging with rod turnbuckles
  • Rod forestay with Profurl furling drum under deck
  • Chain plates in stainless steel for forestay and centre backstay (2 pcs)

Running Rigging

  • Spectra halyards led back to cockpit for easy handling:
  • Main halyard 12 mm
  • Genoa halyard 12 mm
  • Mast head spinnaker halyard 12 mm
  • Spectra sheets and polyester control and reefing lines:
  • Mainsheet 10 mm
  • Genoa Sheet 10 mm
  • Furling control line 8 mm
  • Cunningham 6mm
  • Reef 1 10 mm
  • Reef 2 10 mm
  • Outhaul 8 mm
  • Vang control line 8 mm
Accessories
  • Flag pole, teak with bronze bushing (1 pcs)
  • 25 m shore power cable (1 pcs)
  • 3 kg gas bottle (1 pcs)
  • Fire extinguishers, dry powder of 2 kg each, fitted throughout the yacht (4 pcs) and one fire blanket (1 pcs)
  • Fenders, white air-filled with lanyards and X-Yachts logo (4 pcs)
  • Mooring ropes, polyester 20 m x 14 mm (2 pcs)

Contact Us


More From X-Yachts


2024 X-Yachts X-Power 33C
2024 X-Yachts X4⁹ MkII
2024 X-Yachts Xp 50
2024 X-Yachts X4⁶
2024 X-Yachts X4³